Vishay G4-PM Technical Manual page 54

Technical Manual
Range/Alternatives
<default value>
F.Block 3 Inp.C
< Not In Use >
F.Block 3 Inp.D
< Not In Use >
For an explanation of parameters for Function Blocks 4 to 8 see:
'Func. Block 3 Type'
'F.Block 3 Inp.A.'
'F.Block 3 Inp.B.'
'F.Block 3 Inp.C.'
'F.Block 3 Inp.D.'
Note that the parameters for a Function Block are shown or not shown depending on
the setting of parameter 'Func. Block X Type', for that specific Function Block.
4-14
Explanation and
result of alternatives.
This parameter defines which measuring channel (slot and
channel) that should be used as input C to Function Block 3.
See 'F.Block 1 Inp. A.' for a description of parameter values.
Note: this parameter is only shown if 'Function Block 3 Type' is
'4 Channel'.
This parameter defines which measuring channel (slot and
channel) that should be used as input D to Function Block 3.
See 'F.Block 1 Inp. A.' for a description of parameter values.
Note: this parameter is only shown if 'Function Block 3 Type' is
'4 Channel'.