Factory Default Settings - NETGEAR LB2120 Series User Manual

Factory Default Settings

You can reset the modem to the factory default settings, which are shown in the following table.
For more information about resetting the modem to its factory default settings, see
Factory Default Settings
Table 10. LB2120 modem factory default settings
Feature
Login
User login URL
Admin user name
Login password (case-sensitive)
Local area network (LAN)
LAN IP address
Subnet mask
Operation mode
IP pass-through (IPPT)
DHCP server
DNS mode
DMZ
Mobile broadband and security
Network mode
Auto Connect mode
Network Selection mode
Automatic failover mode
MTU size
IP pass-through (IPPT)
NAT
LTE Modem Model LB2120
on page 62.
Default Settings
http://192.168.5.1
The modem does not require an admin user name.
See the modem label
192.168.5.1
255.255.255.0
Router mode enabled; Bridge mode disabled
Disabled in Router mode; enabled in Bridge mode
Enabled with the following address range:
192.168.5.20 to 192.168.5.99
Auto
Disabled.
If enabled, the default DMZ IP address is 192.168.5.4
All bands
Always except when roaming (The modem automatically attempts to connect
to the mobile broadband network when powered on, except when roaming.)
Automatic (The modem connects automatically to the type of mobile broadband
network that is made available by your mobile broadband service provider.)
Auto (The modem uses the wireline broadband connection by default and fails
over to the mobile broadband connection if the wireline broadband connection
fails.)
1430 (nonconfigurable)
Disabled in Router mode; enabled in Bridge mode
Enabled
Default Settings and Specifications
94
Return the Modem to Its