Getting Started - Cambridge SoundWorks SoundWorks i755 User Manual

GETTING STARTED

A) Remove the SoundWorks i755 from its protective
polybag and place it in your preferred location.
Note: The i755's bass output will be reduced if it is
placed on a plush surface, like a thick carpet or rug.
The Tone Alarm volume will also be reduced.
B) To prepare and connect the AM band antenna:
1) Locate the antenna
2) Fold the base
3) Snap the base into place
4) Position the AM antenna in an out-of-the-way
site. Avoid placing it near the i755 Power Supply.
Insert the AM Antenna's miniplug into the REAR
CONNECTOR PANEL minijack marked AM ANT.
Rotate the AM antenna to achieve the best signal for
individual AM stations.
C) Straighten the wire antenna on the
REAR CONNECTOR PANEL marked "FM ANT".
D) Connect the Power Supply by inserting the its AC
plug into a convenient outlet. Then insert the Power
Supply's smaller DC plug into the jack in the rear of
the i755 marked DC power.
CSW_SWI755_UM_R1.2.indd 7 CSW_SWI755_UM_R1.2.indd 7
D
For best AM radio reception, position
the Power Supply case at least three
feet away from the AM Antenna
A
1
B
3
REAR CONNECTOR PANEL
STRAIGHTEN FM WIRE ANTENNA
C
2
4
i755 POWER INPUT
1
7
10/21/2009 2:39:35 AM 10/21/2009 2:39:35 AM