3-3. Separate SIDE and TOP
1. Unfasten 2 SCREW 1 on the SIDE and push the SIDE back to separate.
2. Unfasten 2 SCREW 2 on TOP and 5 SCREW 2 on REAR to separate the TOP.
3-4. Separate DVD MECHA
1. Rotate the tray 36 degree so that 4 screw assembly holes are shown.
2. Unfasten 4 SCREW 3 and lift the back of MECHA to separate 2 connectors.
3. Slightly lift the front, right and left of TRAY to rotate the door, and lift the back of DVD MECHA to separate while the door opens.
4. Separate connector 1.
Samsung Electronics
3-2