Sony SRS-ZR7 Help Manual page 52

.
Connect to a PC or wireless router using a commercially-available LAN cable.
23
SET UP button
.
Press to use the Wireless Surround function
devices.
24
HDMI ARC TO TV port
.
Connect to the HDMI IN ARC port
25
USB-B port( B)
.
Connect to a PC using a commercially-available USB cable. Use a dedicated cable (not supplied) when connecting a
Walkman or Xperia compatible with High-Resolution Audio formats.
26
UPDATE/WPS button
.
After pressing and holding for 2 seconds while the indicator is lit, the software update starts after the beep sounds from the
speaker.
If your wireless router has a Wi-Fi Protected Setup™(WPS) button
After pressing and holding for two seconds, the speaker is ready to connect to a wireless router after the beep sound from
*4
the speaker .
*1 Available when updating your speaker's pre-installed software. For more details, refer to the following URL.
http://sony.net/nasite
*2 "ARC" indicates for the HDMI ARC port on your TV.
*3 If your wireless router has a Wi-Fi Protected Setup™(WPS) button (AOSS), you can connect to the Wi-Fi network by this method. For details, refer to
the operating instructions supplied with your wireless router.
*4 Not available while the UPDATE indicator is lit
Related Topic
About the indicators
Mounting the speaker on a wall
4-592-259-11(1) Copyright 2016 Sony Corporation
*1
or Wireless Stereo function
*2
on your TV with using the commercially-available HDMI cable.
*1
for combining the speaker and other audio
*3
, you can use this button to connect to the network.
36