Sony SRS-ZR7 Help Manual page 142

When you turn on the speaker for the first time after purchase, pairing information is not stored in the speaker. In this
case, by only placing the speaker in the BLUETOOTH mode, the BLUETOOTH indicator will begin to flash quickly and
the speaker will enter the pairing mode automatically. Then go to step
When you turn on the BLUETOOTH mode, the speaker will try to make a BLUETOOTH connection with the last
connected BLUETOOTH device. If the device is nearby, the BLUETOOTH connection establishes automatically and the
BLUETOOTH indicator stays lit. In this case, turn off the BLUETOOTH function on the BLUETOOTH device, or turn off
the BLUETOOTH device.
Set the speaker to the pairing mode.
3
Press and hold the
quickly.
Perform the pairing procedure on the PC.
4
1.
Click the [Start] button and then [Devices and Printers].
2. Click [Add a device].
3.
Click [SRS-ZR7], and then click [Next].
(power)/ PAIRING button until the speaker beeps and the BLUETOOTH indicator starts flashing
.
126