Checking The Tire Pressure - Toro Z597-D Z Master Setup Instructions

With a 62 or 72 rear discharge mower

Hide thumbs Also See for Z597-D Z Master:

Step

Removing Parts from the

Crate

No Parts Required

Procedure

Remove the tires and the parts for the ROPS from

the shipping crate.

Step

Checking the Tire Pressure

No Parts Required

Procedure

Check the air pressure in the front and rear tires.

Pressure: 13 psi (90 kPa)

Figure 1

Step

Raising the Machine Up and

Installing the Drive Wheels

Parts needed for this step:

Rear wheels

Procedure

1. Remove the screws holding the right angle

retaining plate to the crate.

Figure 2

2. Raise the back of the machine up and support

it with jack-stands.

Figure 3

3. Remove the wheel nuts from both sides of the

vehicle and remove the right angle retaining

plate. Discard the screws and retaining plate.

Table of Contents