2) How to check Ice Maker
Parts
Ice Drop Motor
Ice Sensor
Full Ice Sensor Switch
Level Sensor Switch
How to check
Check resistance between 2 wires.
Check resistance between 2 wires.
Tact Switch
Check resistance between reds.
Tact Switch
Check resistance between reds.
( Good ): 6 ~ 14 ohm
( If defective) : Change the motor
( Good ): 4.4 ~ 50 kohm
; It depends on room temperature.
( If defective) : Change the sensor
(Good)
Tact Switch
ON (Close)
OFF (Open)
( If defective) : Change the Switch
(Good)
Tact Switch
ON (Close)
OFF (Open)
( If defective) : Change the Switch
37
HOW TO CHECK EACH PART
Remark
Terminal
Result
Connect
Some value
Disconnect
No value (0)
Terminal
Result
Connect
Some value
Disconnect
No value (0)