Table of Contents
Advertisement
3. Dispenser Micro Switch (Dispenser Models Only)
1) Disassembling Procedure (Features are model dependent)
No
1
Insert (-) screw driver into bottom hole of
Dispenser Button and pull up.
2) How to check the Hose Ice Maker Tube As.
Procedure
; Check both terminals (Red circle) with a Multi-Tester.
(Test Mode : Resistance )
Tact Switch (Blue circle)
ON (Close)
OFF (Open)
; (If defective) Exchage new one.
No
2
Pull out the Micro Switch.
( Be careful not to damage the hook. )
Termainals (Red circle)
Connected
Disconnected
34
HOW TO CHECK EACH PART
Procedure
Test Result
Some Value
No Value
Hide quick links:
Advertisement
Table of Contents
