Daewoo FRU-541 Series Service Manual page 36

4. Dispenser Solenoid Valve (Dispenser Models Only)
1) Disassembling Procedure (Features are model dependent)
No
1
Disassemble the Cover dispenser Box As
2
Separate Front PCB connector.
(Features are model dependent.)
3
Unscrew to remove Box Dispenser Ice Shut.
2) How to check Dispenser Solenoid Valve
Parts
Dispenser Solenoid Valve
Flap Heater Assembly
Procedure
How to Check
No
4
Disconnect 2 terminals and 2P Wire.
5
Unscrew and remove Solenoid Valve.
6
Unscrew and remove Cover Ice Flap.
Check the resistance of
both terminals.
Check the resistance of
2 terminals with a Tester.
35
HOW TO CHECK EACH PART
Procedure
Remark
( Good ): 215 Ohm (+-10%)
(193 ~ 236 Ohm)
(Defective): Change the part.
( Good ): 96 Ohm (+-8%)
(88 ~ 104 Ohm)
(Defective): Change the part.