Yamaha YFM700RSE Owner's Manual page 116

TIP
To check the rear brake fluid level, remove the
seat. (See page 4-11.)
To access the rear brake fluid reservoir for replen-
ishing:
1. Remove the bolt and quick fastener screw.
8
1. Quick fastener screw
2. Bolt
2. Pull the cowling slightly outward as shown.
1
2
1. Cowling
2. Brake fluid reservoir cap
3. After replenishing, place the cowling in the
original position, and then install the bolt and
quick fastener screw.
Specified brake fluid:
DOT 4
EWB02721
WARNING
Improper maintenance can result in loss of
braking ability. Observe these precautions:
8-32
1
2