Preparation to Software Upgrade
1. Procedure for software upgrade
a) Upgrade from USB:
1) Go to www.philips.com/support to check if the latest software version
is available for this player.
2) Build UPG_ALL file in USB
3) Copy the upgrade file to USB UPG_ALL folder.
4) Then insert USB ,start up DUT enter into HOME screen ,select
Setup >>Advance>> software update >>USB.
5) When upgrade file detected, select "Yes" to upgrade, select
"No" to cancel.
6) Once you start upgrade, please don't power off the DUT, after
upgrade DUT will restart up later a moment time.
b) Upgrade software via network:
1) 1) Setup the network connection.
2) start up DUT enter into HOME screen ,select Setup >>Advance>>
software update >>Network
* You are prompted to start upgrading processes if upgrade media is
detected.
3) Follow the instructions on the TV screen to confirm update operation.
4) When upgrade file
5) Once you start upgrade, please don't power off the DUT, after
upgrade DUT will restart up later a moment time.
2. Check the version information after upgraded.
Wake up DUT, select Setup >>Advance>>version information .
You will see a interface as below:
Model:BDPXXXX/XX
Software Version:
System SW:X.XX
Ethernet :XX:XX:XX:XX:XX:XX
For information, frequently asked questions and software updates, visit
www.philips.com/support.
4-1
Software Upgrade
download completed
, select "Start" to upgrade.
Close