Philips BDP2180 Service Manual page 24

3-2
Mechanical and Dismantling Instructions
Dismantling Instruction
Detailed information please refer to the model set.
Step3: Dismantle the power board and main board.Disconnect connectors(XP7,XP5,XP10),remove 1 screw
on power board and 2 screws on the back panel.(Figure 3)
Step4: Dismantle the loader.Remove 2 screws beside the loader,then pull up the loader.(FIgure 3)
XP7
XP5
XP10
CN501
Figure 3