Software Upgrades - Philips BDP2985/F7 Service Manual

1. Upgrade from USB:
Build UPG file in USB, copy the upgrade file BDP2985.bin to
USB UPG_ALL files. Then insert USB, start up DUT enter into HOME
screen, select Setup >>Advance>> software update >>USB.
When upgrade file detected, select "Yes" to upgrade, select
"No" to cancel.
Once you start upgrade, pls don't power off the DUT, after
upgrade DUT will restart up later a moment time or you press
button "OK" on remote control.
2. Check the version information after upgraded.
Wake up DUT,select Setup >>Advance>>version
information .you will see a interface as below:
Model:BDP2985/XX
Version
System SW:2. XX
Ethernet MAC:XX: XX: XX: XX: XX: XX
For information, frequently asked questions and software updates, visit
www.philips.com/support.
3. Factory Reset Steps
Press "Home" button on remote control‐‐‐>Press"0""3""5""8"‐‐‐>
Select Restore‐‐‐>Press "OK" on remote control
4‐1
Software Upgrade