Toro 74922 Operator's Manual page 38

4. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the Full mark (Figure 50).
1
3
5
5. Start the engine and drive to a flat area. Check the oil
level again.
Changing the Engine Oil Filter
Service Interval: Every 200 hours
Note: Change the engine oil filter more frequently when
operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to Changing the
Engine Oil.
2. Change the engine oil filter (Figure 51).
2
4
6
G008796
Figure 50
1
3
5
Note: Ensure the oil filter gasket touches the engine
and then an extra 3/4 turn is completed.
3. Fill the crankcase with the proper type of new oil; refer
to Changing the Oil.
38
2
4
6
3/4
Figure 51
G008804
G008748