1. Brake pedal free play adjusting nut
2. Brake camshaft lever
3. Gap "A"
4. Push the brake camshaft lever in direction (a)
8
until it stops [apply approximately 50 N (5.0
kgf, 11.2 lbf) of force], and then turn the brake
lever free play adjusting nut on the brake ca-
ble at the final gear case so that gap "B" mea-
sures 4.0–6.0 mm (0.16–0.24 in).
1. Brake lever free play adjusting nut
2. Brake camshaft lever
3. Gap "B"
5. Check the brake lever free play and, if neces-
sary, adjust it by turning the brake lever free
play adjusting bolt at the brake lever. Turn the
brake lever free play adjusting bolt in direction
(a) to increase the free play, and in direction
(b) to decrease it.
8-34