Valve Clearance; Adjusting The Drive Select Lever Safety System Cable; Checking The Front Brake Pads And Rear Brake Friction Plates - Yamaha GRIZZLY 350 YFM35FGDX Owner's Manual

1. Locknut
2. Throttle cable free play adjusting bolt
3. Throttle cable free play
3. Tighten the locknut.
8
EBU24060

Valve clearance

The valve clearance changes with use, resulting in
improper air-fuel mixture and/or engine noise. To
prevent this from occurring, the valve clearance
must be adjusted by a Yamaha dealer at the inter-
vals specified in the periodic maintenance and lu-
brication chart.
EBU24070
Adjusting the drive select lever safety
system cable
The drive select lever safety system cable stretch-
es with use, which can result in improper function.
Therefore, the safety system cable should be
checked and adjusted at the intervals specified in
the periodic maintenance and lubrication chart.
EBU28413
Checking the front brake pads and rear
brake friction plates
The front brake pads and the rear brake friction
plates must be checked for wear at the intervals
specified in the periodic maintenance and lubrica-
tion chart.
NOTE:
This ATV is equipped with a wet, multiple-disc type
rear brake, which is located inside of the final gear
case.
8-28