How to Fasten Wheel Nuts
Selecting the pre-set number ( for example, the pre-set number ① and 600Nm )
① Press the power switch. The display shows [ 0 ] blinking.
② Press ① for a few seconds. The pre-set ① is set 600 Nm.
When the display indicates ① [ P.1 ], release the key.
Soon after indicating [ P.1 ], the display also indicate
the torque value [ 600 ] Nm.
At this moment, the pre-set key ① is selected.
Selected pre-set number is valid until changing to other pre-set number.
③ Check the rotative direction ( Reverse Lever ).
L : Left Rotation
(Fastening the left
handed screw)
④ Apply the reaction force absorber next to the fastening
bolt/nut.
Then apply the socket to the fastening bolt/nut.
Automotive Mode [ Aut ] mode
Reverse
Blinking
R : Right Rotation
(Fastening the
left handed screw)