Check And Clean The Hydraulic Units - Toro Z master G3 Operator's Manual

1. Engine guard
2. Engine air intake screen
3. Bolt
Check and Clean the Hydraulic
Units
Service Interval: Before each use or daily
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Move the seat forward.
4. Clean the debris and grass from the hydraulic units
(Figure 71).
5. Position the seat.
Figure 70
4. Fan housing
5. Screw
1. Hydraulic units
47
g0151 17
Figure 71