Checking The Tire Pressure; Servicing The Headlights - Toro 71253 Operator's Manual

Table of Contents

Advertisement

Checking the Tire Pressure

Service Interval: Every 25 hours
Maintain the air pressure in the front and rear tires at
20 psi (138 kPa). Check the pressure at the valve stem
(Figure 31) after every 25 operating hours or yearly,
whichever occurs first. Check the tires when they are
cold to get the most accurate pressure reading.
1. Valve stem

Servicing the Headlights

The headlights use an 1156, automotive-type bulb.
Removing the Bulb
1. Open the hood.
2. Disconnect the wire connectors from both of the
bulb holder terminals.
3. Rotate the bulb holder 1/4 turn counterclockwise
and remove it from the reflector (Figure 32).
1. Bulb holder
2. Reflector
3. Tabs
4. Insert and rotate the bulb counterclockwise until it
stops (approx. 1/4 turn), and remove the bulb from
the bulb holder (Figure 33).
Figure 31
Figure 32
4. Slots
5. Terminals
1. Bulb
2. Metal pins
Installing the Bulb
1. Align the metal pins on the side of the bulb base
with the slots in the bulb holder.
2. Insert the base into the holder (Figure 33).
3. Push and rotate the bulb clockwise until it stops.
4. Align the tabs on the bulb holder (Figure 32) with
the slots in the reflector, insert the bulb holder into
the reflector, and rotate it 1/4 turn clockwise until
it stops.
5. Connect the wire connectors to the terminals on the
bulb holder.
28
Figure 33
3. Bulb holder
4. Slots

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wheel horse xl 440h

Table of Contents