Important - Playback Levels; Pcworks Specifications - Cambridge SoundWorks PCWorks Speaker System Installation And Operating Instructions Manual

Important
Playback Levels
PCWorks is intended for individual
or small group listening and will
achieve surprisingly high output
levels. However, playing the
system continuously at overly
loud, distorted levels on heavy
bass program material may cause
its internal fuse to blow.
The fuse can be replaced only by
a qualified representative. To avoid
this inconvenience and a possible
non-warranty repair charge,
reduce the playback volume when
the system shows obvious signs of
stress, i.e. it sounds "raspy,"
"fuzzy," and/or "muddy."
16
Specifications
PC Works'
Three-channel
Amplifier Specifications
Satellite amplifier: One channel
driven into a 4 ohm load at less than
1% total harmonic distortion, at
1kHz: 3.5 watts RMS.
Subwoofer amplifier: With a
4 ohm load at less than 1% total
harmonic distortion, at 100Hz:
10 watts RMS.
These specifications apply to a
PCWorks operating from a 120 VAC
line and a 12V DC power adapter.
Note: in advertising, the term "peak
power"—double an amplifier's music
power—is often used.