Satellite Installation - Philips 22PFK4000 User Manual

code and then enter the new code twice.
The new code is set.
Forgotten your Child lock code?
If you forgot your code, you can override the current
code and enter a new code.
1. Press  and select Setup and press OK.
2. Select Satellite settings > Child lock > Change code
and press OK.
3. Enter the overriding code 8888.
4. Now enter a new Child lock code and enter it again
to confirm.
7.5

Satellite installation

Installing satellites
About installing satellites
This TV has a built-in satellite DVB-S/DVB-S2
receiver. Connect the cable from your satellite dish
directly to the TV. Use a coaxial cable fit for
connecting a satellite antenna dish. Make sure your
satellite dish is perfectly aligned before you start the
installation.
Up to 4 satellites
You can install up to 4 satellites (4 LNBs) on this TV.
Select the exact number of satellites you wish to
install at the start of the installation. This will speed up
the installation.
Unicable
You can use a Unicable system to connect the
antenna dish to the TV. Select if you are installing
satellites for a Unicable system, for 1 or for 2 satellites
at the start of the installation.
Installing
You can install your satellites during the initial TV
setup. If you only watch satellite channels, you can
skip the TV channel installation.
You can always start a new satellite installation from
the Setup menu.
To install satellite channels . . .
1. Press  and select Setup and press OK.
2. Select Search for satellite and press OK.
3. Select Install satellites and press OK.
4. The TV shows the current installation setting. If the
current setting corresponds with the satellite
installation you want, you can start searching for
satellites. Select Search and press OK. Go to step 5. If
the current setting is not the setting you want, select
Settings and press OK. Go to step 4b.
4b - In the Settings menu, select the exact number of
satellites you want to install. Or, if you use a Unicable
setup, select Unicable for 1 satellite or Unicable for 2
satellites according the number of satellites you want
to install for Unicable. Select the setting you want and
press OK.
4c - If the exact number of satellites is set or you
completed the Unicable settings, select Search and
press OK.
5. The TV will search for satellites available on the
alignment of your antenna dish. This may take a few
minutes. If a satellite is found, its name and reception
strength are shown on screen. If a channel package
is available for any of the satellites found, you can
select the package you want.
6. To install the channels of the satellites found,
select Install and press OK. The TV shows the number
of channels and radio stations found.
7. To store the satellite settings, all satellite channels
and satellite radio stations, select Finish and press
OK.
Channel packages
About channel packages
Satellite operator can offer channel packages that
bundle free channels (free-to-air) and offer a sorting
that suits a country. Some satellites offer subscription
packages - a collection of channels you pay for.
If you choose a subscription package, the TV might
ask you to select a Quick or Full installation.
Select Satellite operator channels only to install the
channels of the package only or select All satellite
channels to install the package and all other
available channels too. We recommend a Quick
installation for subscription packages. If you have
additional satellites that are not part of your
subscription package, we recommend a Full
installation. All installed channels are put in the
channels list All.
Unicable setup
The Unicable system
You can use a Unicable system to connect the
antenna dish to the TV.A Unicable system uses one
cable to connect the satellite dish to all satellite
receivers in its system. Unicable is typically used in
apartment buildings. If you use a Unicable system, the
TV will ask you to assign a user band number and
corresponding frequency during the installation. You
can install 1 or 2 satellites with Unicable on this TV.
26