Table of Contents
Advertisement
2.
Remove the heat sink (2).
CAUTION:
easily damaged and bent during removal.
NOTE:
system board components each time the heat sink is removed. Replacement thermal material is
included with the heat sink, processor, and system board spare part kits.
The following illustration shows the replacement thermal material locations. Thermal paste is used on
the processor (1) and the heat sink (2).
Reverse this procedure to install the heat sink assembly.
42
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Take extreme care when removing the heat sink. The heatpipe is very fragile and can be
The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the
Advertisement
Table of Contents
