Table of Contents
Advertisement
3.
Remove the two Phillips PM2.5×4.0 screws (2) that secure the bracket on the left side of the computer,
and the remove the bracket (3).
The display brackets are available in the Bracket Kit using spare part number 842302-001.
4.
To remove the right display bracket, remove the Phillips PM2.0×2.0 screw (1) that secures the display
bracket to the right side of the computer, and then remove the bracket (2).
The display brackets are available in the Bracket Kit using spare part number 842302-001.
5.
Disconnect the display cable from the system board (1).
36
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Advertisement
Table of Contents
