Dispenser; Display Pcb; Ice Button Assembly; Water Button Assmebly - LG LFXS29626 Series Service Manual

3-9 DISPENSER

1) Pull out the drain
3) If nozzle is interfered with button,
push and pull out the bottom of
button.
CAUTION: When replacing the dispenser cover make
sure the lead wire does NOT come off and the water line
is not pinched by the dispenser.

3-10 DISPLAY PCB

As shown below, remove 1 screw on the PCB fixing screw.
Remove the display PCB fixing screw.
Case, PCB
2) Holding the inner side of
the dispenser pull
forward to remove.
4) Remove the
lead wire.
Display PCB

3-11 ICE BUTTON ASSEMBLY

1) Remove the 1 screw holding the lever.
2) Remove the spring from the hook.
3) Push and pull on the tab to remove.
Button Lever

3-12 WATER BUTTON ASSMEBLY

1) Remove screws.
2) Grasp the Button assembly and lift.
Button Lever

3-13 ICE CORNER DOOR REPLACEMENT

1) Loosen the front screw as shown in the picture.
2) Lift up the hinge with one hand.
3) Pull out the Ice Corner Door with the other hand.
- 11 -
hinge