Asus H110M-R Manual page 14

4. Line In port (light blue). This port connects to the tape, CD, DVD player, or other
audio sources.
5. Line Out port (lime). This port connects to a headphone or a speaker. In the 4.1, 5.1
and 7.1-channel configurations, the function of this port becomes Front Speaker Out.
6. Microphone port (pink). This port connects to a microphone.
Refer to the audio configuration table for the function of the audio ports in 2.1, 4.1, 5.1, or
7.1-channel configuration.
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Light Blue (Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
To configure a 7.1-channel audio output:
7. USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1
devices.
8. USB 3.0 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.0/2.0
devices.
•
•
•
HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
9.
and is HDCP compliant allowing playback of HD DVD, Blu-Ray, and other protected
content.
10. DVI-D port. This port is for any DVI-D compatible device.
DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with
DVI-I.
11. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
1-6
Headset
2.1-channel
Line In
Line Out
Mic In
-
Use a chassis with HD audio module in the front panel to support a 7.1-channel audio
output.
USB 3.0 devices can only be used for data storage.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance from your USB 3.0 devices.
Due to the design of the Intel
USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB
devices must update their firmware for better compatibility.
4.1-channel
Rear Speaker Out Rear Speaker Out
Front Speaker Out Front Speaker Out
Mic In
-
100 series chipset, all USB devices connected to the
®
Chapter 1: Product introduction
5.1-channel 7.1-channel
Rear Speaker Out
Front Speaker Out
Bass/Center Bass/Center
- Side Speaker Out