Table of Contents
Advertisement
1.6 Warnings
Warnings
ESD
STATIC ELECTRICITY
MAY DESTROY THE
PRODUCT
Laser exposure
General Warnings
Cleaning
When electrical replacements or disassembly is taking place, use a ESD-mat. The
internal electronic are very sensitive to static electricity.
When mains voltage on the BeoCenter 2 is required, remove the connection from
the BeoCenter 2 to the ESD mat.
The BeoCenter 2 contains a laser system and is classified as a class 1 laser product.
The BeoCenter 2 must only be opened by qualified personal only.
Wear cutton cloves to avoid any fingerprints on the product.
The aluminium and display surface on the product is very sensitive, so handling
should be done with great care to avoid damage. When transporting the
BeoCenter 2 it is recommended to use the product cover, part no. 3375021.
The interface cable is very sensitive to sharp bends and other large mechanical
influence. Also be sure that the plugs in each end, are connected correctly.
Clean the BeoCenter 2 surfaces using a lint-free cloth which you have wrung
firmly in lukewarm water.
Never use alcohol or other solvents to clean any parts of the BeoCenter 2.
Advertisement
Table of Contents
