Table of Contents
Advertisement
Activate the PIN-code
Enter the PIN-code
If the PIN-code has been forgotten
Product locked by PIN-code
Select the SETUP menu.
Press
twice and then STOP to bring up the PINCODE SETUP menu.
l
Enter the 4 digit Pin-code. Re-enter the code to confirm it and press GO.
If you want to change or delete the PIN-code, enter the correct PIN-code and press GO.
It is now possible to change the PIN-code or delete the PIN-code.
If the PIN-code is activated and the product is disconnected from the mains for
more than15-30 minutes, a PINCODE menu appears as soon as the product is
switched on.
Enter the PIN-code, and the product starts again.
If the PIN-code has been forgotten the only way to unlock the product again is by
entering a 5 digit Master-code.
The Master-code is ordered by sending a request via the Retail System.
When the product prompts for a PIN-code, press and hold
MASTERCODE menu.
Enter the Master-code and press GO. This will deactivate the PIN-code and
reactivate the product.
The product is locked by PIN-code when:
-
The PIN-code is activated and the mains is disconnected for more than 15- 30
minutes.
The product is unlocked when the PIN-code is entered.
The PIN-code counter is set to 5 attempts within 3 hours.
When a wrong PIN-code has been entered 5 times within 3 hours, the product
cannot receive any commands for a period of 3 hours.
After this period the PIN-code counter is reset.
The product must be in standby mode to activate the timer.
PIN-code 1.5
down to bring up the
l
Advertisement
Table of Contents
