Table of Contents
Advertisement
7-2. Remote Control Unit Installation Position
The remote control unit can be operated from either a non-fixed position or a wall-mounted position.
To ensure that the air conditioner operates correctly, do not install the remote control unit in the following places:
In direct sunlight
Behind a curtain or other place where it is covered
More than 8 m away from the air conditioner
In the path of the air conditioner's airstream
Where it may become extremely hot or cold
Where it may be subject to electrical or magnetic interference
Where there is an obstacle between the remote control unit and air conditioner (since a check signal is sent
from the remote control unit every 5 minutes)
Attaching the remote control unit to wall
Before mounting the remote control unit, press the ON/OFF operation button at the mounting location to make
sure that the air conditioner operates from that location (Fig.5). The indoor unit should make a beeping sound
to indicate that it has received the signal.
Mounting screws
4 x 16 (included)
To take out the remote control unit, pull it forward.
Remote control
unit mount
Rear side
Press
Set in
place
To prevent loss of the remote control
unit, you can connect the remote
control unit to the mount by passing
a string through the remote control
unit and attachment hole.
Fig.5
25
Hole
Hide quick links:
Advertisement
Table of Contents
