Table of Contents
Advertisement
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes. This
is normal and the image can be readjusted using automatic image setup and the image
controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat
Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-attach
the CRT monitor temporarily until you have re-configured the system; preferably to
1920x1080 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Addressability
640x350
640x480
720x400
800x600
832x624
1024x768
1152x864
1280x1024
1366x768
1440x900
1600x900
1680x1050
1920x1080
Refresh rate
70Hz
60Hz, 72Hz,75Hz
70Hz
56Hz, 60Hz, 72Hz, 75Hz
75Hz
60Hz, 70Hz, 75Hz
75Hz
60Hz, 70Hz, 75Hz
60Hz
60Hz
60Hz, 75Hz
60Hz
60Hz
Chapter 2. 2-6
Advertisement
Table of Contents
