Table of Contents
Advertisement
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to
reattach the CRT monitor temporarily until you have re-configured the system;
preferably to 1600X900 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Timing
640 x 350
640 x 480
700 x 570
720 x 400
800 x600
832 x 624
1024 x 768
1366 x 768
1152 x 864
1280x1024
1440x900
1600x900
Refresh rate(Hz)
70Hz
60Hz 72Hz 75Hz
50Hz
70Hz
56Hz 60Hz 72Hz 75Hz
75Hz
60Hz 70Hz 75Hz
60Hz
75Hz
60 Hz 70Hz 75Hz
60Hz
60Hz 75 Hz
2-7
Chapter 2.
Advertisement
Table of Contents
