•
bezel
3.
To remove the :
a. Open the
front bezel
b. Disconnect the data cable and power cable from the connectors on the [1, 2].
c. Close the front bezel door [3].
d. Slide the out of the computer [5].
Installing the
1.
Insert the into the optical drive bay until it clicks into place.
2.
Open the
front bezel
3.
Connect the data cable and power cable to the connectors on the .
4.
Close the front bezel door.
5.
Install the:
•
bezel
•
cover
6.
Follow the procedure in
Removing the WLAN card
1.
Follow the procedure in
2.
Remove the:
•
cover
•
bezel
3.
Open the
front bezel
4.
To remove the WLAN card:
a. Remove the screw to release the plastic tab that secures the WLAN card to the computer [1].
b. Remove the plastic tab to access the WLAN cables [2].
c. Disconnect the WLAN cables from the connectors on the WLAN card [3].
d. Disconnect the WLAN card from the connector on the system board [4].
door.
door.
After Working Inside Your
Before Working Inside Your
door.
Computer.
Computer.
9