Table of Contents
Advertisement
projection screen, or will you need to find something a little more space effective?
Wire access
Have you planned how you will run wires to your LCD TV locations? Will you have all of your
equipment next to the TV, or will it be hidden in another room or area?
Do you have enough wire to complete the project? Too much wire is better than not enough.
Mounting
Does your TV require a proprietary mounting device? Some manufacturers require specific
mounts for their TVs.
What is the size and weight of your TV? All brackets have weight and size restrictions. It is
necessary to make sure your TV will fit within the limitations of the mount.
Are you going to fit the mount into a tight space or cabinetry? It may be impossible to use some
brackets if the space does not allow the proper leverage.
Will you need to tilt or move the TV from time to time? There are mounts available that will
adjust to the seating arrangement in the room.
Will the TV be positioned at an angle? Special mounts and techniques may be required to keep
your TV mounted at or into an angle.
What will the TV be mounted to? It is necessary to have proper support for your TV. In most cases,
there will be wood, metal or mortar to mount the bracket to.
TV Breakdown - See our TV Selection »LCD TVs: 32" and smaller This type of TV is clean looking
and lightweight. They are usually easier to mount and require smaller brackets. LCD TVs: 32" and
larger This type of TV is a larger version of their smaller counterparts. They are usually more expensive
in larger sizes than other technologies. Most will work with the same style bracket as plasma TVs.
Plasma TVs: 32" and larger This is the most common type of Flat-Panel TV. These TVs are available
in sizes as small as 32" and go all the way past 100". Most have a variety of mounting options. DLP
Wall-Mountable TVs This is the least common type of Wall-Mountable TV. There are usually special
requirements for this mount.
Needed Tools. Some tools used in the installation profession can cost hundreds of dollars. However,
these tools can save hours of work on a project and allow a skilled installer to learn about a house's
construction without cutting into the wall. They also eliminate much of the risk involved in working near
electrical and plumbing systems. Here is a list of tools needed for TV mounting:
? Stud finder
? Tape measure
? Level
? Pencil
? Power drill
? Socket wrench
? Allen wrench
15
Advertisement
Table of Contents
