Table of Contents
Advertisement
_____________________________________________________________________________________________________________________
11. Scale adjustment
To adjust a balance it is necessary to break protective marks, therefore
to calibrate the scale please contact the nearest service.
12. Connecting a computer or a printer
When cooperating with the scale, a computer should be equipped with a program
which enables processing data from the scale – available in AXIS with extra
charge.
USER MANUAL
The scale is equipped with RS232C or
RS485 (optional), which can be used to
connect external devices such as a computer
or a printer.
When cooperating with a printer data is send
automatically after result stabilisation, but
next transmission is possible after removing
previously weighted sample.
The scale sends following information:
successive
weighing result (see: printer cooperation
mode setting).
The scale may be equipped with the second
interface (optional) used for example for
continuous weighing result transmission to
an additional, external display.
number
of
weighing
9
and
Advertisement
Table of Contents
