Updating Software; Restoring To The Default Settings; Adjusting Audio Volume Level - BenQ RP652 User Manual

28 Basic operations

Updating software

Whenever a new version of software is available, the system will automatically detect the
update and will prompt you to download it every time you turn on the display.
Find an OTA upgrade package! do you want to update? upgrade
If you want to update the software, select
control. Or your can skip this step and update the software later.
• Software update process may take some time to complete.
• During the update process, do not turn off the device or disconnect the Internet connection.
Any interruptions during the software update process may permanently damage your display.

Restoring to the default settings

If you encounter problems with your display, you can restore all parameters to the
factory default settings.
Before performing a factory reset, make sure to back up your important data and files.
There are two methods that can be used to reset your display.
Via OSD menu
1. Press the MENU button to open the OSD menu.
2. Press the  or  button to select Setting and press the OK button.
3. In the Setting menu, press the  or  button to select Recall.
4. A confirmation appears on the screen, select Yes to reset your display.
Via Android OS
1. Press the INPUT button on the remote control and select ANDROID.
2. On the home screen, select All Apps (
Update.
3. In the Backup / Update menu, select Restore to Factory Default.
4. A confirmation appears on the screen, select Yes to reset your display.

Adjusting audio volume level

Press oron the control panel or
volume.
System Update
package version:1.0.3, size:193M
No
and press the OK button on the remote
Yes
) > Settings (
on the remote control to adjust the
VOL- / VOL+
Yes
) > Backup /