Axis M5014-V User Manual page 11

AXIS M5014-V PTZ Dome Network Camera
Access the Product
With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or
release control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Queue.
The PTZ controls can be disabled under PTZ > Advanced > Controls, see Controls on page 23.
Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.
User-defined buttons can also appear in the Control panel. See Controls on page 23.
Select a PTZ preset position to steer the camera view to the saved position. See Preset Positions
on page 22.
Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a
position on the bar to steer the camera view to that position.
Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to
zoom to that position.
11