Convert To Mp4 - Panasonic HC-V270 Operating Instructions Manual

Advanced (Playback)

Convert to MP4

Before copying, convert AVCHD or MP4 scenes to those with the image quality (MP4 (1280k720/
25p) or MP4 (640k360/25p)) that supports playback on a PC or uploading on the internet.
≥ Scenes recorded in iFrame or saved as MP4 (640k360/25p) cannot be converted to MP4.
1
Select the menu.
: [EDIT SCENE] # [CONVERT TO MP4]
MENU
2
Touch the scene you want to convert.
≥ The scene selection is made as you touch it, and the
cancel the operation, touch the scene again.
≥ You can select up to 99 scenes in succession.
3
Touch [Enter].
4
Select the quality after conversion.
[HD (1280k720/25p)]
[VGA (640k360/25p)]:
* You cannot convert and copy MP4 [720/25p] scenes.
≥ MP4 scenes after conversion are saved to the same media as the scenes before conversion.
5
Touch [YES].
≥ To continue converting scenes to MP4, repeat steps 2 to 5.
To stop converting to MP4 halfway
Touch [CANCEL] during format conversion.
To exit the MP4 conversion
Touch [Return].
≥ A scene recorded over a long time may take time.
≥ When converting and copying the scenes recorded in AVCHD to an MP4 scene, the scene
exceeding approximately 20 minutes is automatically divided.
≥ If you convert protected scenes to MP4, their protection will be cleared after the conversion.
*
: Convert to MP4 (1280k720/25p) and copy.
Convert to MP4 (640k360/25p) and copy.
indication appears on the thumbnail. To
- 94 -