Change Settings - Philips HTS3532BL/94 Service Manual

Change settings

This section helps you to change the settings of
your home theater.
Caution
best value for your home theater. Unless you have a
reason to change a setting, it is best to leave it at the
default value.
Note
You cannot change a setting that is grayed out.
To return to the previous menu, press
exit the menu, press
Picture
Change the picture settings to suit your
preferences.
Note
The best setting is automatically selected for the TV. If
you change the setting, make sure that the TV supports
the new settings.
Picture settings and format
1
Press - .
2
Select [Video Setup], and then press OK.
3
Change the following settings, and then
press OK:
[TV System]: For TV supported video
format.
[TV Display]: For TV picture display
format.
[Picture Settings]
settings.
- . To
- .
4-2
Picture resolution
set the HDMI video settings that best match up
with your TV capability.
1
Press -
2
Select [Video Setup], and then press OK.
3
Select [HDMI Setup], and then press OK.
4
Change the following settings, and then
press OK:
[Wide Screen Format]: For 16:9 wide
screen TV display setting.
[HDMI Video]: HDMI resolution.
1
Press -
2
Select [Video Setup], and then press OK.
3
Select [HD JPEG] > [On], and then press
OK.
Sound
Change the sound settings to suit your
preference.
HDMI audio
HDMI audio is automatically down-mixed to
two channel for TV speakers. If you do not want
to output audio through your TV, disable the
HDMI audio.
1
Press -
2
Select [Audio Setup], and then press OK.
3
Select [HDMI Audio] > [Off], and then
press OK.
Language
Select a language for the home menu, audio,
and subtitles.
.
.
.