Philips HTS3532BL/94 Service Manual page 25

4
Enter the password with the Numeric
buttons.
5
Select an age rating, and then press OK.
To play all discs irrespective of the
rating, select level 8 or [Off].
Lock disc
To restrict access to discs that are not encoded
with ratings and parental control, lock the disc
manually. You can lock upto 20 discs on your
home theater.
1
While playing a disc, press
2
Select [General Setup], and then press
OK.
3
Select [Disc Lock] > [Lock], and then
press OK.
» A message prompts you to enter the
password.
4
Enter the password with the Numeric
buttons.
» The disc is locked.
To play the locked disc, enter the
password.
Energy saving
Save energy by changing the following settings.
Auto standby
When playing a disc or a USB storage device,
automatically switch your home theater to
standby if:
it is in pause or stop mode, and
no button is pressed for 30 minutes.
1
Press - .
2
Select [General Setup], and then press
OK.
3
Select [Auto Standby] > [On], and then
press OK.
4-4
Sleep timer
Set timers to switch the home theater to
1
2
3
4
- .
5
Screen saver
Automatically switch your home theater to
screen saver mode if:
1
2
3
Display panel
Change the brightness of the home theater
display panel.
1
2
3
4
Apply factory settings
Reset your home theater to the default settings.
You cannot reset the parental control settings.
Press - .
Select [General Setup], and then press
OK.
Select [Sleep Timer], and then press OK.
Select the duration of the sleep timer.
» The sleep timer can be set up to 60
minutes. If the sleep timer is set to
[Off], it switches off.
Press OK to activate.
» The home theater switches to standby
it is in pause or stop mode, and
no button is pressed for 10 minutes.
Press - .
Select [General Setup], and then press
OK.
Select [Screen Saver] > [On], and then
press OK.
Press - .
Select [General Setup], and then press
OK.
Select [Display Dim], and then press OK.
Select the brightness, and then press OK.