Change Settings; Picture; Sound - Philips htd3500 User Manual

5 Change settings

This section helps you to change the settings of
your home theater.
Caution
•
Most of the settings are already configured with the
best value for your home theater. Unless you have a
reason to change a setting, it is best to leave it at the
default value.
Note
•
You cannot change a setting that is grayed out.
•
To return to the previous menu, press
exit the menu, press

Picture

Change the picture settings to suit your
preferences.
Note
•
The best setting is automatically selected for the TV. If
you change the setting, make sure that the TV supports
the new settings.
Picture settings and format
1
SETUP.
Press
2
Select [Video Setup], and then press OK.
3
Change the following settings, and then
press OK:
• [TV System]: For TV supported video
format.
[TV Display]: For TV picture display
•
format.
[Picture Settings]: Predefined color
•
settings.
EN
19
BACK. To
SETUP.
Picture resolution
To enjoy high definition HDMI video output,
set the HDMI video settings that best match up
with your TV capability.
1
SETUP.
Press
2
Select [Video Setup], and then press OK.
3
Select [HDMI Setup], and then press OK.
4
Change the following settings, and then
press OK:
[Wide Screen Format]: For 16:9 wide
•
screen TV display setting.
[HDMI Video]: HDMI resolution.
•
High definition picture
Support high definition JPEG pictures.
1
SETUP.
Press
2
Select [Video Setup], and then press OK.
3
Select [HD JPEG] > [On], and then press
OK.

Sound

Change the sound settings to suit your
preference.
HDMI audio
HDMI audio is automatically down-mixed to
two channel for TV speakers. If you do not want
to output audio through your TV, disable the
HDMI audio.
1
Press SETUP.
2
Select [Audio Setup], and then press OK.
3
Select [HDMI Audio] > [Off], and then
press OK.