Connectors And Buttons - Axis P1354–E User Manual

AXIS P1354–E Network Camera
Hardware Overview
1 Sunshield adjustment
2
Sunshield
3
Top cover
4
Network camera
5
Safety wire tab
6 Cable hole
7
Network connector
8
Bottom cover screws (4x)
9
Cable cover
10 Cable cover screws (2x)
11 Bottom cover
12 Heaters. Caution!
13 Network cable (route through wall bracket)
14 Bracket adapter
15 Bracket screws (4x)
16 Bracket adjustment screw
17 Wall bracket
18 Alternative cable hole

Connectors and Buttons

For technical specifications, see page 67.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NOTICE NO NO TICE TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's
instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .
I/O Connector
Use with external devices in combination with, for example, tampering alarms, motion detection, event triggering, time lapse recording
and alarm notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:
1
2
3
4
5
6
7
8
9
10
13
14
15
Caution! May be hot.
Caution!
11
12
16
17
18
8