Table of Contents
Advertisement
Priming the Smoke Unit
When preparing to run this engine, add 15-20 drops of smoke fluid through the
smokestack (see Fig. 2). We recommend M.T.H. ProtoSmoke, Seuthe, LGB, or
LVTS fluids. Do not overfill the unit or the fluid may leak out and coat the interior
engine components.
If you choose not to add smoke fluid (or have already added fluid but choose to
run smoke-free), turn off the smoke unit by turning the smoke unit volume control
fully counter-clockwise. Failure either to add fluid to the smoke unit or to turn
it off may damage the smoke unit heating element and/or wicking material.
Add Smoke Fluid
Figure 2. Adding Smoke Fluid
Running the engine without a primed
smoke unit may cause damage
Smoke Unit
Volume
Figure 3. Smoke Unit Control
Premier Alco S-2 Diesel Engine Proto-Sound®2.0
4
Advertisement
Table of Contents
