Set Up Checklist; Lubrication; Priming The Smoke Unit - M.T.H. premier M10000 Operator's Manual

Set Up Checklist

•
Lubricate the locomotive
•
Prime the smoke unit
•
Check to see whether the battery needs to be charged for full sound effects
•
Apply power to run as described in the Basic Operating Section of this manual

Lubrication

You should lubricate all cars to prevent them from squeaking. Use
light household oil and follow the lubrication points marked "L" in
Fig. 1. Do not over-oil. Use only a drop or two on each pivot point.
Lubricate Pick Up Rollers (L)
Figure 1. Lubrication Points on the car

Priming The Smoke Unit

When preparing to run this engine, add 15-20 drops of smoke fluid through the
smokestack (see Fig. 2). We recommend M.T.H. ProtoSmoke, Seuthe, LGB, or LVTS
fluids. Do not overfill the unit or the fluid may leak out and coat the interior engine
components.
If you choose not to add the fluid (or have already added the fluid but choose to run
smoke-free), turn off the smoke unit switch located under the engine (see Fig. 3).
Failure either to add fluid to the unit or to turn it off may damage the smoke unit
heating element and/or wicking material.
Premier M10000 Locomotive Set
DO NOT
OVER OIL
Lubricate Wheel Axles (L)
3