Canon EOS Rebel T6i Instruction Manual page 15

[Wi-Fi/NFC]
When it is set to [Disable], you cannot select [Wi-Fi function] under

the [51] tab.
When using the NFC function, set [Wi-Fi/NFC] to [Enable], then add

[X] to [Allow NFC connections]. Press the <B> button to add
or remove [X].
When the use of electronic devices and wireless devices is

prohibited, such as on board airplanes or in hospitals, set it to
[Disable].
When it is set to [Enable], you cannot use the camera by connecting

it to a Connect Station, computer, printer, GPS receiver, TV set, or
other device with a cable (p.18).
Using the Camera While Wireless LAN Functions Are Active
When you want to prioritize wireless LAN functions, do not operate the
power switch, Mode Dial, card slot cover, or battery compartment cover.
Otherwise, shooting or playback operation may be prioritized and
wireless LAN functions may be terminated during the process.
Select the Wi-Fi function to
4
connect to.
Press the <W> <X> or <Y> <Z>

keys to select an item.
The camera's wireless LAN settings

are set from this screen. For further
connection settings, see "Easy
Connection" or "Advanced
Connection".
Basic Operation and Settings
15