Manual Connection By Searching Networks - Canon EOS Rebel T6i Instruction Manual

Manual Connection by Searching Networks

When [Find network] is selected, a list of active access points nearby
is displayed, accompanied by information about them. Select the SSID
(or ESS-ID) of the access point to connect to and establish a
connection.
Selecting the Wireless Network
Select [Wi-Fi function].
1
Under the [51] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function].
Select [m].
2
Select [m] (Upload to Web service)

and press <0>.
Select a Web service.
3
Select a Web service to connect to,

then press <0>.
The contents and ordering of the list

of items displayed will vary depending
on settings.
The Web service to connect to can be

changed later (p.126).
 The camera's <k> lamp will blink.
 When the [Send to] screen (p.125) is
displayed, select a destination and go
to step 4.
117