Canon EOS Rebel T6i Instruction Manual page 119

Entering the Wireless LAN Encryption Key
Set the encryption key specified for the access point. For details on

the specified encryption key, refer to the access point's instruction
manual.
The screens displayed in steps 6 to 8 below vary depending on the

authentication and encryption specified for the access point.
Go to step 9 when the [IP address set.] screen is displayed instead

of the screens for steps 6 to 8.
Manual Connection by Searching Networks
The [Key index] screen is displayed

6
only if WEP encryption is used by the
access point.
Press the <W> <X> keys to select

the key index number specified for
the access point, then press <0>.
Select [OK] and press <0> to go to

the next screen.
Press the <W> <X> keys to select

7
the format and the number of
characters used for the key, then
press <0>.
Select [OK] and press <0> to go to

the next screen.
Enter the encryption key using the

8
virtual keyboard (p.22), then press
the <M> button.

The [IP address set.] screen (p.120)
will be displayed.
119