Emptying The Dirt Tank; Cleaning The Filter - Bissell FEATHERWEIGHT 2033 Series User Manual

Emptying the Dirt Tank

WARNING
To reduce the risk of electrical shock, turn Power Switch OFF and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
3
NOTE: The Dirt Tank may be rinsed with warm water and a mild detergent if
needed. The Dirt Tank must be thoroughly dried before replacing.

Cleaning the Filter

1
Follow the steps above to remove
Dirt Tank and Filter. To clean the filter,
shake it over a trash bin and gently tap
against side until all debris is gone.
NOTE: After heavy usage, you may clean the Filter by washing it gently by hand
in warm water and mild dish detergent. Rinse thoroughly and make certain it is
completely dry before replacing it. If filter is torn, replace it with a new filter.
Turn the vacuum OFF
and hold the vacuum
vertically, pressing
the Dirt Tank Latch.
Gently pull the Dirt
Tank from the hand
vacuum.
Empty contents
of Dirt Tank into a
trash bin, and gently
tap against side to
remove any build up.
2
4
Replace Filter. Attach
Dirt Tank to vacuum
by securely fitting onto
Hand Grip. Make sure
Dirt Tank is correctly
secured.
2
Return Filter to Dirt
Tank and follow
instructions above to
return the Dirt Tank to
vacuum, making sure it
is correctly secured.
Grip and remove
the Filter.
www.BISSELL.com
5