Bissell FEATHERWEIGHT CORDLESS XRT Manual

Bissell FEATHERWEIGHT CORDLESS XRT Manual

2-in-1 lightweight vacuum

Advertisement

FEATHERWEIGHT™ CORDLESS XRT
2-IN-1 LIGHTWEIGHT VACUUM
3079 SERIES
What's in the Box? ......................................................... 2
LED Display Status .........................................................3
Using the 2-Way Folding Handle .........................3
Using the Hand Vacuum ............................................4
Emptying the Dirt Tank...............................................4
Cleaning the Filters ........................................................5
Maintaining the Brush Roll ........................................6
Troubleshooting ............................................................... 7
Warranty ............................................................................... 7
Product Overview
1. Power Button
2. Brush Roll ON/OFF Button
3. 2-Way Folding Handle
Release Trigger
4. Hand Vacuum Release Button
5. Hand Vacuum Power Button
6. Dirt Tank Release Button
7. Charging Light Indicator
8. Dirt Tank
9. Swivel Head
Go online for a comprehensive walkthrough
of your new purchase!
This guide has everything you need to get ready for first use,
including setting up, using and maintaining your machine,
but online you'll find additional resources like tips and
troubleshooting, videos, product registration, parts, and more.
Go to support.BISSELL.com.
1
3
2
4
5
7
6
8
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FEATHERWEIGHT CORDLESS XRT and is the answer not in the manual?

Questions and answers

Jasminda Phull
January 27, 2025

how do i wash the foot assembly without touching the electrics? ie, how do i take it apart so it's safe to wash in a bucket.

1 comments:
Mr. Anderson
February 10, 2025

To safely disassemble the Bissell Featherweight Cordless XRT foot assembly for washing without touching the electrics, follow these steps:

1. Turn Off and Disconnect – Ensure the vacuum is powered off and disconnected from the charger.
2. Remove the Foot Assembly – Press the foot release button to detach it from the vacuum.
3. Access the Brush Roll – Turn the foot over and locate the brush roll cover tab.
4. Unlock the Brush Roll Cover – Slide the tab down to the "OFF" position and use a coin to turn the screw counterclockwise.
5. Remove the Brush Roll – Lift the cover, grasp the brush roll, and pull it out.
6. Clean the Components – Remove any hair or debris from the brush roll and end caps.
7. Reassemble – Place the cleaned brush roll back into the foot, turn the screw clockwise to lock it, and reattach the foot to the vacuum.

Always ensure the vacuum is powered off and unplugged before maintenance to reduce the risk of electric shock or injury.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for Bissell FEATHERWEIGHT CORDLESS XRT

  • Page 1: Table Of Contents

    This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and troubleshooting, videos, product registration, parts, and more. Go to support.BISSELL.com.
  • Page 2: What's In The Box

    According to Federal and State regulations, removal and proper disposal of Lithium-Ion batteries is required. For specific battery disposal instructions please contact Call2Recycle at 877-723-1297 or visit www.call2recycle.org. For full instructions on battery removal for recycling visit support.BISSELL.com. What’s in the Box? Standard accessories may vary by model. To identify what should be included with your purchase,...
  • Page 3: Assembling And Charging Your Vacuum

    Solid red light, then machine shuts OFF Using the 2-Way Folding Handle Pull the 2-Way Folding Fold the handle forward to Fold the handle back for Handle Release Trigger to fold easily clean underneath low easy storage. the handle. places. BISSELL.com 3...
  • Page 4: Using The Hand Vacuum

    Dirt Tank, then snap the Dirt Tank back into place on the hand vacuum. WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 4 BISSELL.com...
  • Page 5: Cleaning The Filters

    Reattach filter assembly into the Dirt Tank and attach to hand vacuum until it snaps securely in place. WARNING Do not operate your machine with damp or wet filters or without filters in place. BISSELL.com 5...
  • Page 6: Maintaining The Brush Roll

    Brush Roll. coin to turn lock clockwise to screw into place. WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 6 BISSELL.com...
  • Page 7: Troubleshooting

    6. The LED light will reset when the solid red machine is turned ON. Note: Any other servicing should be performed by an authorized service representative. Warranty 1-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691 for complete warranty information. BISSELL.com 7...
  • Page 8 We’re Waggin’ Our Tails! BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear.

Table of Contents

Save PDF