Appendices; Motherboard; Motherboard Layout - Bosch DIP-7080-00N Installation Manual

DIVAR IP 7000 2U
9

Appendices

This chapter gives information for supporting and troubleshooting.
9.1

Motherboard

All graphics shown in this chapter were based upon the latest PCB Revision available at the
time of publishing of the manual. The motherboard you've received can differ from the
graphics shown in this chapter.
9.1.1

Motherboard layout

Figure 9.1: Motherboard layout
Important notes to the user:
–
–
–
–
Bosch Sicherheitssysteme GmbH
Jumpers not indicated are for testing only.
When LE2 (Onboard Power LED Indicator) is on, system power is on. Unplug the power
cable before installing or removing any components.
All systems have a SATA DOM connected to Serial ATA ports (I-SATA-5) with a small
power connector (DOM PWR).
SATA-DOM: Is plugged in connector I-SATA-5 on the motherboard.
Installation Manual
Appendices | en 53
2014.12 | V4 | DOC