Initial Setup - Samsung UN40JU6700 User Manual

6 series
Hide thumbs Also See for UN40JU6700:
Table of Contents

Advertisement

1. Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. During Initial Setup, your TV
pairs with the Samsung Smart Control, connects to your home network, implements Smart Hub agreements,
links to the source of your live TV signal, and sets up control of your cable or satellite box.
Information You Need
Have the following information on hand before you
turn on your TV for the first time:
Your wireless network's password. (Make sure
your network is on.)
Your Postal or Zip code.
The name and location of your cable or satellite
provider (if you use one).
Running Initial Setup
1.
Point the Samsung Smart Control at the TV.
2.
Press the
button on the Samsung Smart Control to turn on
the TV, and then follow the directions on the screen.
Once your Samsung Smart Control has paired, you can use the
Samsung Smart Control to move the pointer on the screen. Place
a finger on the POINTER button, and then move the Samsung
Smart Control. The pointer on the screen moves in the direction
you moved the Samsung Smart Control. To select items, press the
POINTER button. For more information about using the Samsung
Smart Control, see "The Samsung Smart Control " on page 6.
To learn more about operating your TV and its Smart Features, launch the TV's built in e-Manual after you have
completed the Initial Setup. For information about the e-Manual, see "The e-Manual" on page 8.
Using the TV Controller
You can use the TV Controller on the back of the TV instead of the remote control to control most of the
functions of your TV. Move the Control Stick up, down, left, or right to move the cursor. Press the Control Stick
to select or activate the item highlighted by the cursor.
Internet Access
The TV must be connected to the Internet to use
the Smart Features. If you have a wireless network,
confirm that your network router is working before
you start the initial setup. If you have a wired
network, connect the TV's LAN port to the network
with an Ethernet cable before you begin (CAT 7 cable
preferred).
Control Menu
: Opens Smart Hub.
: Opens the menu.
: Selects a source.
: Turns off the TV.
Control Stick
The Control Stick is located
on the lower left corner of
the back of the TV.
English - 5

Advertisement

Table of Contents
loading

Table of Contents